Model Number

YGM--65,75,85,85B,95,130

High Pressure Suspension Grinder is suitable for grinding the barite, limestone, kaollnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. It is possible to produce 30-80 mesh coarse powder through special device in the machine.
High Pressure Suspension Grinder Features:
1. Having higher capacity of 20-30% relatively to Raymond mill, and Higher grinding force of rollers to stuffs because of high pressure springs.( notes for 5R4121: compared to 5R4119 raymond mill, at the same motor powder, capacity is improved to 10%, and Higher grinding force of rollers to stuffs because of high pressure springs.)
2.It can process the mineral stuffs of Moh's hardness below 9.3 grade.
3.The final products have a wide range, max. powders are up to 0.95mm(20mesh), mini ones are 0.038mm(400mesh).
little pollution and dust collector efficiency is to national limitation.
High Pressure Suspension Grinder Working process:
Working process: large stuffs are delivered to bunker by elevator after crushed, then to chamber by electric feeder. In mainframe, shovels scoop up stuffs into the parts between rollers and ring, the processed powders are blowed up to analytical engine with wind entering chamber by blower, part of powders which can not be up the demand fineness will fall back to be grinded, left(that is final product) with airflow enter concentrator and divided with air then discharged from discharge vavle. Air returns to blower and circles, flowing in minus state.

Specification	YGM-65	YGM-75	YGM-85	YGM-85B	YGM-95	YGM-130
Feed size （ mm ）	<12	<15	<20	<20	<25	<30
Final fineness (mm) （ mesh ）	0.613-0.033 (30 -425 )	0.613-0.033 (30 -425 )	0.613-0.033 (30 -425 )	0.613-0.033 (30 -425 )	0.613-0.033 (30 -425 )	0.613-0.033 (30 -425 )
capacity (t/h ）	0.4-1.8	1-3	1.2-4.6	1.2-4.6	2.1-5.6	3---8
Ring internal diameter and height （ mm ）	Ф726×150	Ф865×150	Ф907×140	Ф915×150	Ф950×170	Ф1280×210
Roller diameter and height （ mm ）	Ф210×150	Ф260×150	Ф270×140	Ф270× 150	Ф310×170	Ф410×210
Roller number （ piece ）	3	3	3	3	4	5
Mainframe motor （ kw ）	15	18.5	22	22	37	75
Overall demission （ m ）	4.1×3.3×4.5	4.3×3.5×5.1	5.3×4.1×5.2	5.6×3.4×4.9	7.1×5.9×7.9	9200×7250×9700